Introduction
Zhumu supports global default variables functionality. For example, if you don't want to modify parameter values of parametric components each time, you can add these parameters to the global default parameters. This way, when creating parametric objects, the global default variables will be automatically used first. Since some variables in the system parameter library are commonly used, we've compiled them for user reference.
Common Variables Table
Door Panel Category
| Variable Name |
Variable |
Value |
| Whether to drill hinge holes |
sfdk |
0 or 1 【0 = drill, 1 = don't drill】 |
| Whether to drill hinge positioning holes |
sfddwk |
0 or 1 【0 = drill, 1 = don't drill】 |
Drawer Category
| Variable Name |
Variable |
Value |
| Slide rail drilling |
hddk |
0 or 1 【0 = drill, 1 = don't drill】 |
| Drawer hole diameter |
hole_rkc |
10 【Fill in actual value as needed】 |
Cross Panel Grooving
| Variable Name |
Variable |
Value |
| Cross groove depth |
jccs |
3 |
| Cross groove width allowance |
jcck |
0.25 |
Arc Toe Kick
| Variable Name |
Variable |
Value |
| Arc toe kick grain direction |
yhtjwl |
0, 1, 2 【0 = no grain, 2 = vertical grain, 1 = horizontal grain】 |
| Arc toe kick groove depth |
yhtjcs |
16 |
| Arc toe kick groove width |
yhtjck |
5 |
| Arc toe kick groove spacing |
yhtjjg |
20 |
| Arc toe kick allowance |
yhtjyl |
200 |
Allow Collision Hole Depth Greater Than Panel Thickness Control
| Variable Name |
Variable |
Value |
| Allow hole depth greater than panel thickness |
yxksdybh |
0 【0 = allow, 1 = don't allow】 |
